Turning On/Off

Click the button fast 5 times.

Proper Storage

Room temp and standing up straight. DO NOT STORE ON SIDE, IN THE SUN, OR IN HOT ENVIRONMENTS.

Charging

Charge the device fully of the box before using. Some devices may not come fully charged.

Drawing Procedure

Activate the device by lightly drawing on it.

Device Positioning

Maintain the device in an upright position while in operation.

Drawing Timing

Do not inhale until the device blinks. This device is designed for connoisseurs, and this will only degrade the oil. 5 to 7 second draws max.

Cooling Period

Allow a minimum of 15-30 seconds for the device to cool down between draws.

General Operation

To turn the device on and off, click the button five times in rapid succession. The white LED will flash five times. Double click the button to pre-heat the device, during which the white LED will pulse. Hold down the button to cycle between the three heat settings: green for 6.5W, blue for 7.5W, and red for 8.5W. Click the button once to check the charge level: red indicates low charge, blue indicates medium charge, and green indicates high charge.

Charging

When you plug the battery into a USB Type-C charger, the battery indicator stays on to display the charging status with pulsing flashes. When power is less than 40%, the red LED flashes. When power is more than 40% and less than 70%, the blue LED flashes. When power is more than 70% but less than 100%, the green LED flashes. When the battery is fully charged, the green LED turns off and stops flashing. When you unplug the charger, the white LED flashes three times. Charging should take around one hour.

Troubleshooting

If you have another Luster Pod, please try using it with the battery to ensure that the issue is not due to the Luster Pod malfunctioning. If you have another charging cord, please try using it to ensure that the issue is not due to a faulty cord. Please try charging the device on a different port.

Cartridge Handling

Store and use cartridges upright at all times. Let stand upright for 24 hours before first use. Avoid overtightening. Remove cartridge before charging the battery.

Cleaning & Maintenance

Clean mouthpiece and contacts with isopropyl alcohol as needed. Store in a cool, dry, dark place. Avoid heat or cold.

Usage Tips

Use battery preheat if available. Take smooth 3–5 second pulls and allow time between hits.If airflow is tight, gently twist the cartridge to adjust.

Clog Fixes

Warm oil by hand or with preheat. Take 3–4 short, strong pulls to clear clogs. Use caution.

Troubleshooting

Clean contacts and reseat cartridge if not hitting. Let stand upright for 24 hours and take a few primer pull.

Pod Handling

Always remove the pod before charging the battery. Store upright at all times. Avoid pressing the pod too hard onto the battery, as this may misalign contact points.

Cleaning & Maintenance

Luster Pods tend to collect more residue in the mouthpiece than 510 carts. Clean regularly with a Q-tip and isopropyl alcohol. For long-term storage, keep pods in a cool, dry, dark place. Avoid extreme heat or cold.

Usage Tips

Take smooth 3–5 second pulls. Let the pod cool for 1–2 minutes between hits. This helps prevent clogs caused by oversaturation and hardening oil.

Clog Fixes

Try short, strong inhale bursts (3–5 in quick succession) to loosen clogs. Follow with one strong, steady inhale to dislodge remaining blockage. Additionally, you can purchase the Klutch-designed CCELL Luster Pro Battery, which has a preheat function for better hits and easier clog removal.

Troubleshooting

If not hitting, clean contacts on the pod and battery with isopropyl alcohol. Try rotating the pod 180° and reinserting. Let the pod stand upright for 24 hours, then take a few hits to prime the atomizer.

Battery Life & Charging

The iKrusher device uses a light indicator to display battery status: green for high charge, yellow for medium charge, and red (blinking three times) for low charge. While charging, the red light will pulse, and when the device is fully charged, the green light will blink eight times before shutting off. It can be charged via USB Type-C with an output of 5V–1A. To avoid potential damage, do not use adapters over 100W.

Usage Tips

For best performance, inhale softly, as if sipping water through a straw rather than pulling hard like a milkshake. Avoid taking long or repeated pulls in quick succession to help maintain the integrity of the ceramic coil. If you notice an air bubble surrounding the apertures at the bottom of the stainless-steel post, wait for it to clear before pulling to ensure smooth airflow and consistent vapor.

Storage

Store the device upright whenever possible, and keep the mouthpiece plug inserted to prevent lint or contaminants from entering. It’s best to store the device at room temperature and away from direct sunlight or extreme heat, which can affect oil consistency and device performance.

Troubleshooting

If you’re experiencing restricted airflow, check that the plug covering the charging port on the bottom of the device has been removed. In the event of a clog, take a few soft, short pulls — the dual airflow technology will warm the oil and help clear the blockage. If an air bubble is stuck near the apertures, hold the device in your closed hand to gently warm it, keeping it upright until the oil moves upward. If charging issues occur, try using a different cord or charging port to ensure a proper connection.

Output Voltage

3.2-20 V

Atomizer Resistence 

1.2 Ω